Filter
Top Products
13
English
Step 2: Connecting the
video cable
This connection enables you to view the
disc playback from the DVD recorder.
You only need to choose one of the
options below to make your video
connection.
Option 1: Using Composite Video
jack (good picture quality)
● Use the supplied audio/video cables
(yellow plug) to connect VIDEO (CVBS)
- OUT2 jack on the DVD recorder to the
video input jack (or labeled as A/V In,
Video In or Composite) on the TV.
Option 2: Using S-Video jack
(excellent picture quality)
● Use an S-video cable (not supplied) to
connect S-VIDEO (Y/C) -OUT2 jack
on the DVD recorder to the S-Video
input jack (or labeled as Y/C or S-VHS)
on the TV.
Option 3: Using Y Pb Pr jacks (best
picture quality)
1 Use the component video cables (red/
blue/green - not supplied) to connect the
Y Pb Pr -OUT1 jacks on the DVD
recorder to the corresponding
component video input jacks (or labeled
as Y Pb/Cb Pr/Cr or YUV) on the TV.
2 If your TV accepts Progressive Scan signal,
see page 51 for detailed Progressive Scan
set up.
IMPORTANT!
The progressive scan video quality is
only available through Y Pb Pr
connection and a progressive TV is
required. It is strongly advised to
complete the DVD recorder
installation first, before enabling the
progressive scan feature.
AUDIO
OUT
S-VI DEO
IN
VIDEO IN
TV
OR
Option 1
Option 2
Option 3
OR
Basic Connections - DVD recorder (continued)
TIPS: Before making or changing any connections, make sure that all the devices are disconnected from
the power outlet.
001_033_dvdr3355_37A_eng5 21/3/05, 3:16 PM13