Filter
Top Products
54
English
DVD System Menu Options (continued)
Setting or changing the password
You need to enter your four-digit
password to play a prohibited disc or if
prompted for a pin code.
1 In ‘System Menu-Playback,’ use 3 4 keys
to select { Parental Rating Level } and
press OK.
➜ You will be prompted to enter your
four-digit pin code.
* * * *
Enter Password
OK
CancelOK
2 Use the numeric keypad 0-9 to enter
your four-digit pin code and select
OK
in the menu and press OK on
the remote control to confirm.
➜ The set rating level menu appears.
Set Rating Level
New password
4. PG 13
5. PG R
4. PG 13
OK
New
OK
3 Move to
New
in the menu and press
OK to access new password menu.
New password
Confirm password
* * * *
New Password
OK
Cancel
OK
4 Use the numeric keypad 0-9 to enter
your new four-digit pin code, then press
4 to select the next entry field and enter
the same pin code a second time.
5 Move to
OK
in the menu and press
OK to confirm.
➜ To abort the change, select
CANCEL
and press OK.
Digital Audio Output
After connecting the DVD recorder to
your TV and other devices, you may need
to change the digital output setting.
Adjust the Digital Output only if you used
the DVD recorder’s coaxial jack.
1 In ‘System Menu Playback,’ use 3 4 keys
to select { Digital Audio Output } and
press OK.
{ ALL }
Select this if you use the COAXIAL jack to
connect the DVD recorder to a stereo
receiver that has a built in Multi-Channel
decoder.
{ LPCM }
Select this if the connected audio equipment is
not capable of decoding multichannel audio
Dolby Digital and MPEG-2 multi - channel
signals are converted to PCM (Pulse Code
Modulation.)
2 Use 34 keys to select a setting and
press OK to confirm.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
034_060_dvdr3355-37A_eng5 21/3/05, 3:28 PM54