Filter
Top Products
23
English
Getting Started
Step 1: Inserting Batteries
1
3
2
1 Open the battery compartment.
2 Insert two batteries type R06 or AA,
following the indications (+-) inside
the compartment.
3 Close the cover.
CAUTION!
– Remove batteries if they are
exhausted or if the remote is not to
be used for a long time.
– Do not use old and new or
different types of batteries in
combination.
– Batteries contain chemical
substances, so they should be
disposed of properly.
Using the remote control to
operate the system
1 Aim the remote control directly at the
remote sensor (iR) on the front panel.
2 Press REC SOURCE button on the
remote control to select the mode you
wish to control (for example TUNER,
Front-CVBS.)
3 Then select the desired function (for
example S, T.)
Step 2: Setting the TV
1
Connect the power cable from the DVD
recorder’s ~ MAINS to the power
supply.
2 Turn on the TV and set it to the correct
video-in channel. You should see the blue
DVD background screen.
➜ Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO. See your
TV’s manual for more details.
➜ Or, you may go to channel 1 on your
TV, then press the Channel down button
repeatedly until you see the Video In
channel.
➜ Or, the TV remote control may have a
button or switch that chooses different
video modes.
➜ Or, set the TV to channel 3 or 4 if you
are using an RF modulator.
IMPORTANT!
When you complete the
connections and turn on the DVD
recorder for the first time, it is
advisable that you make several
basic settings.
Please see the following pages on
using the System Menu features
to program TV channels and menu
language settings. This will improve
the performance of this DVD
recorder considerably.
001_033_dvdr3355_37A_eng5 21/3/05, 3:17 PM23