Filter
Top Products
1
Connect an S-Video cable (not supplied) to the S-VIDEO
(VIDEO OUT) jack of the DVD Player and to the TV’s S-
VIDEO In jack.
2
Connect the supplied audio cable to one pair of the red and
white AUDIO OUT (left and right) jacks on the DVD Player
and to the left/right AUDIO IN jacks on the TV. Match the
cable colors to the jack colors.
3
Connect the supplied AC power cord to the MAINS jack on
the rear of the DVD Player.
4
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press the POWER ON/OFF button on
the front of the DVD Player to turn on the DVD Player.
5
Turn on the TV power. Set the TV to the correct S-Video In
channel. Such channels usually are near channel 00. See your TV
owner’s manual for details. Or, change channels at the TV until you
see the DVD screen saver on the TV.
Hookups (cont’d) 11
Connecting to a TV Only
TV has an S-Video In Jack
Back of TV
(example only)
LEFT AUDIO IN
S-VIDEO IN
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
RIGHT AUDIO IN
2
1
3
Y
Pb
Pr
• On the TV, the S-Video In jack
may be labeled Y/C, S-Video, or S-
VHS (super video).
• Set VIDEO OUTPUT to S-VIDEO.
Details are on page 34.
Helpful Hints