Filter
Top Products
Helpful Hints (cont'd) 43
Disc will not play.
• Make sure the Disc label is facing up. If you are playing a two-sided Disc, make sure the side you
want to play is facing up. Details are on page 15.
• Check the Parental Controls. Details are on pages 27-29.
• Check the Region Code of the DVD.The DVD must be coded for All regions or Region 1 in order
to play on this DVD Player. Details are on page 7.
• See if the Disc is defective by trying another Disc. Make sure the Disc is not scratched or warped.
Carefully clean the Disc. Details are on page 6.
• Make sure the NTSC or PAL format of the DVD matches the TV and the DVD Player.
Details are on page 36.
• Check the Video Output, Progressive Scan, and Picture Source settings. Details are on pages 34-35.
An Audio CD will not play.
• Some Audio CDs available on the market are copy protected or enhanced.These discs will not play
on this DVD Player. See your retailer for options regarding non-protected Audio CDs.
The DVD logo does not appear on the TV screen after you remove a Disc.
• Reset the DVD Player by switching it off, then on again.
The DVD Player does not respond to the remote control.
• Aim the remote control directly at the remote sensor on the front of the DVD Player. Details are on
page 17. Point the remote control toward the DVD Player, not your TV.
• Remove any obstacles between the DVD Player and the remote control.
• Inspect or replace the batteries in the remote control. Details are on page 8.
The DVD Player will not select some features, such as Angles, Subtitles, or
multi-language Audio.
• The feature may not be available on the Disc. If it is not, the will appear on the TV screen. Check
the Disc case to see if the Disc has the feature. If the Disc does not have the feature, the DVD
Player cannot create the feature.This is not a malfunction of the DVD Player.
The DVD Player does not work.
• Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord
and try to operate the Player again as usual.
Strange codes appear on the Player’s display.
• Remove and reinsert the Disc.
• Clean the Disc.
• Disconnect the power cord from the power outlet for a few minutes, then reconnect the cord and
try playback as usual.