Filter
Top Products
INPUTMENU
ENTER/
■
MENU
ENTER/
■
INPUT
COMPO.
PC
INPUTCH
HDMI
フ
DISPLAY
INPUTCH
HDMI
フ
PC
COMPO.
Component/RGB-in select
External scaler mode
POWER SAVE
OFF
Off
RGB
OSD position Upper left
Screensaver
Signal
OSD Language English (UK)
HDMI
Setup
Pos. /Size
Sound
Picture
13
Notes:
Selecting is also possible by pressing the INPUT button on the unit.
Input terminal will not be selected if the terminal board is not installed into the
SLOT.
Select to match the signals from the source connected to the component/RGB
input terminals. (see page 38)
Image retention (image lag) may occur on the plasma display panel when a still
picture is kept on the panel for an extended period. The function that darkens
the screen slightly is activated to prevent image retention (see page 45), but this
function is not the perfect solution to image retention.
•
•
•
•
Select the input signals to be connected by installing the optional Terminal Boards.
Initial selections
Selecting the On-Screen Menu Language
Selecting the input signal
INPUT
Press to select the input signal to be played back from the
equipment which has been connected to the Plasma Display.
HDMI1
HDMI2
HDMI3
HDMI4
COMPONENT
PC
INPUT
HDMI signal terminal in SLOT1
HDMI signal terminal in SLOT2
COMPONENT or RGB signal terminal in SLOT3
PC signal terminal in PC IN
Using dedicated buttons for input selection
Press to select HDMI signal terminals 1–4 in SLOT 1 and 2.
Press to select component or RGB signal terminal in SLOT 3.
Press to select PC signal terminal in PC IN.
Press to display the menu screen.
Press to select “Setup”.
Press to display the Setup menu.
Press to select
OSD Language.
Press to select your
preferred language.
Selectable languages
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
(Japanese)
Setup menu