Filter
Top Products
34
1
Select “Side panel”.
2
Adjust the menu.
Negative image
Off
Off
HighSide panel
Screensaver
Start
Wobbling
Peak limit
Function
2
change
1
select
Off Low Mid High
3
Exit from Screensaver.
or
Notes:
To reduce the occurrence of image retention, set the “Side panel” to “High”.
The side panels may flash (alternate black / white) depending on the picture being shown on the screen. Using
Cinema mode will reduce such flashing.
•
•
Reduces screen image retention
These functions prevent the occurrence of an “image retention” on the display when turned ON.
Wobbling: Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention
of sharper contour of image.
On1: Shifts the image every 30 seconds.
On2: Shifts the image at a dot level pitch depending on screen-detection.
Peak limit: Suppresses image contrast (peak brightness).
Note:
When a still picture is viewed for an extended time, the screen may become slightly darker. (see
page 45)
1
Select “Wobbling” or “Peak limit”.
2
Select “On1”, “On2” or “Off”
(Wobbling).
Select “On” or “Off” (Peak
limit).
Negative image
Off
Off
HighSide panel
Screensaver
Start
Wobbling
Peak limit
Function
2
change
1
select
Side Panel Adjustment
Do not display a picture in 4:3 mode for an extended
period, as this can cause an image retention to remain on
the side panels either side of the display field.
To reduce the risk of such an image retention, illuminate
the side panels.
This function may be applicable to the non-picture area.
Side panel
4:3
Screen Display
Image
retention
Screensaver (For preventing image retention)