Filter
Top Products
16
Basic Controls
Scrolling bar and Test patterns functions
Pressing activates one of the following two functions. The function button setting can be configured by
accessing “Function button assign” in the Options menu. (see page 41)
Scrolling bar Test patterns
Press
Yes No
Scrolling bar
Scrolling bar
Press to
select
“Yes”.
Press.
Activates the Scrolling bar only screensaver. After 15
minutes, the display enters standby mode.
Scrolling bar only
To exit this mode, press any button.
Note:
Auto power off is deactivated during Scrolling bar or Test patterns operation. (see page 36)
Press
Yes No
Test patterns
Test patterns
Press to
select
“Yes”.
Press.
Each time you press a different test pattern is
displayed (seven in all).
Colour Bars Red Green
Blue
Frame
(2 lines × 2 dots)
Black
1% window
To exit this mode, press any button other than .
EXT. SCALER function
Each time you press , an external scaler is activated or deactivated.
OnExternal scaler mode
Off: Use the built-in scaler.
On: Use an external scaler.
The setting is valid with the following signals.
1125 (1080) / 24p•25p•30p•50p•60p
With input signals other than these, specifying “On” will display the following message.
OnExternal scaler mode
Input signal must be 1125p(1080p)
Note:
You can also turn the built-in scaler On and Off by accessing “External scaler mode” in the Setup menu. (see page
35)