Filter
Top Products
23
Picture Adjustments
● Cinema reality
When “On”, the display attempts to reproduce a more natural
interpretation of sources such as movie pictures, which are
recorded at 24 frames per second. If the picture is not stable,
turn the setting to “Off”.
Off
On
Note:
When “On”, this setting only affects the following signal input:
525i (480i), 625i (575i), 1125 (1080) / 60i signal input during “Component” input signal.•
● Studio Gain
Sharpens the contrast for a better view when a part of the
image is too light to see.
Off
On
Off: Disables “Studio Gain”.
On: Enables “Studio Gain”.
Notes:
“Studio Gain” can be modified when “Studio mode” in the Options menu is “On”. When “Studio mode” is “Off”,
this setting is “Off” and cannot be changed. (see page 41)
This setting is valid only when the input signals are as follows:
Component Video, RGB (analog), SDI, HDMI
•
•
● Noise reduction
Sets the following three NR (Noise Reduction) functions together.
P-NR, Mosquito NR, Block NR
Off
Mid
Min
Advanced Max
[Advanced NR]
Sets the three NR functions separately.
1
Select “Advanced”.
Off
Off
Advanced
P-NR
Mosquito NR
OffBlock NR
Noise reduction
select
2
Select the item and set.
Off
Off
Advanced
P-NR
Mosquito NR
OffBlock NR
Noise reduction
2
set
1
select
Off
Mid
Min
Max
P-NR: Automatically reduces unwanted picture noise.
Mosquito NR: Reduces mosquito noise around subtitles on MPEG videos.
Block NR: Reduces block noise when playing MPEG videos.
Notes:
“Noise reduction” cannot be adjusted while a PC signal is being applied.
“Block NR” cannot be adjusted while a HD signal is being applied.
•
•
Helpful Hint (
Normalise
Normalization)
On the remote control unit, while the “Advanced settings” menu is displayed, if the OK button is pressed during
“Normalise”, then all adjustment values are returned to the factory settings.