Philips TH-50VX100E Flat Panel Television User Manual


 
0
0
0
0
1
NormalSound Mode
Off
Bass
Normalise
Mid
Treble
Balance
Surround
Volume
32
Item Details
Sound Mode
Normal: Emits the original sound.
Dynamic: Accentuates sharp sound.
Clear: Attenuates human voice.
Bass Adjusts low pitch sounds.
Mid Adjusts normal sounds.
Treble Adjusts high pitch sounds.
Balance Adjusts left and right volumes.
Surround
Select On or Off.
The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if
you were at a concert hall or cinema.
Volume Adjusts the sound volume level.
Note: Bass, Mid, Treble and Surround settings are memorized separately for each Sound Mode.
SDI Sound Output
This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board
(TY-FB11DHD) is installed to the unit.
Item Details
Left Channel
Channel 1 to Channel 16
Selects left audio channel.
Right
Channel
Channel 1 to Channel 16
Selects right audio channel.
Sound Out
On Off
On: Enables audio output.
Off: Disables audio output.
Level Meter
Off
1-8ch 9-16ch
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.
Off: Hides the audio level meter.
1-8ch: Displays the audio level meter (1-8ch)
9-16ch
: Displays the audio level meter (9-16ch)
Note:
This menu is available only when
selecting a slot that HD-SDI Terminal
Board with audio (TY-FB10HD) or Dual
Link HD-SDI Terminal Board (TY-
FB11DHD) is installed.
1
Display the menu screen.
2
Select “Sound”
Setup
Pos. /Size
Sound
Picture
2
OK
1
select
3
Select the item and set.
0
0
0
0
1
NormalSound Mode
Off
Bass
Normalise
Mid
Treble
Balance
Surround
Volume
2
adjust or select
1
select
4
Exit the menu.
or
Helpful Hint (
Normalise
Normalisation)
While the “Sound” menu is displayed, if the OK button is pressed during “Normalise”, then all adjustment values
are returned to the factory settings.
2
/
2
Left Channel
SDI Sound Output
Right Channel
Sound Out
Level Meter
Channel 1
Channel 2
On
Off
Sound Adjustment