Filter
Top Products
22
● Black
extension
Adjusts the dark shades of the image in gradation.
Less More
● Input level
Adjustment of parts which are extremely bright and hard to
see.
Less More
● Gamma
Available setting values vary depending on “Picture Mode”
settings and the type of input signal, as follows.
Down Up
Picture Mode S Curve 1.0 2.0 2.2 2.5 2.6
Normal
–
*
3
*
1
Dynamic
*
3
–
*
1
Cinema
–
*
3
*
2
Monitor
–
*
3
–
*1 When 2k1k signals are received with the Dual Link HD-SDI Terminal Board
(TY-FB11DHD), Gamma “2.6” can also be selected.
*2 When 60 Hz signals are received, Gamma “2.5” can also be selected.
*3 When 2k1k signals are received with the Dual Link HD-SDI Terminal Board
(TY-FB11DHD), Gamma “1.0” cannot be selected.
● AGC
Increases the brightness of dark signal automatically.
Off On
● “W/B” adjustment
Less More
0
0
W/B High R
W/B High G
0
W/B High B
0
W/B Low R
0
W/B Low G
0
W/B Low B
Adjusts the white balance for light red, light
green or light blue areas.
Adjusts the white balance for dark red,
dark green or dark blue areas.
Carry out “W/B” adjustment as follows.
1.
Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.
2. Adjust the white balance of the dark sections using the “W/B Low R”, “W/B Low G” and “W/B Low B” settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.
25
0
5
Advanced settings
Picture Mode
Contrast
Normalise
Brightness
Sharpness
White balance
Colour Management
Normal
Off
Normal
0
0
0
2.2
Off
Off
Off
Off
0
0
0
0
0
Input level
Advanced settings
Normalise
Gamma
AGC
W/B High R
W/B High G
W/B High B
W/B Low R
W/B Low G
W/B Low B
Cinema reality
Studio Gain
Noise reduction
Black extension
Picture Adjustments
Advanced settings
Enables fine picture adjustment at a professional level.
Notes:
The adjustment values are memorized separately for each input terminal.
The adjustment range values should be used as an adjustment reference.
•
•