Filter
Top Products
<VRB1208>
22
GROUP 001
001 R–1, YLW 02-002.41~032.06
002 B–3, GRN 01-027.30~035.08
GROUPING BLACKBOARDS
Blackboards can be registered by dividing them into groups according
to the disc and title to enable selective use later.
This makes it possible to store drawn characters and pictures in
positions matching the played images.
Pictures and characters comprising groups are also stored as steps.
When executing the blackboards, arbitrary registered blackboard
groups can be selected and displayed.
It is also possible to delete blackboards on a per-group basis.
When ‰ (pointer) appears to the left of DISPLAY or GROUP on the
setup screen (refer to page 20), the group can be selected by pressing
NEXT, PREV. Pressing SAVE will then enter that group.
When ‰ (pointer) appears to the left of GROUP, pressing the DEL
button will cancel that groups content.
Step section
Group section
EXECUTING AN ENTIRE GROUP TO EXECUTE
A GROUP
1. Press the button.
2. Press the button twice.
÷ The step section blinks.
÷ The step section should continue displaying 000.
÷ When the step is 000, the entire group will be executed.
÷ When a step is selected, only the selected step in the group will
be executed.
3. Press .
4. Input the number of the group to be recalled/executed
using the numeric buttons.
5. Press the button twice.
÷ This starts execution according to the selected blackboard.
TO EXECUTE STEPS IN A GROUP
1. Press the button.
2. Press the button twice.
3. Press if you want to switch the group.
÷ If you do not want to change the group, go to step 6 below.
4. Input the number of the group to be recalled/executed
using the numeric buttons.
5. Press the button.
6. Input the number of the step to begin execution using
the numeric buttons.
7. Press the button.
÷ This starts execution of the selected step in the selected group.
÷ The step setup is released after the step has been executed.
GROUPING VIDEO BLACKBOARDS
BLACKBOARD GROUP 001: 000
BLACKBOARD GROUP 001: 000
Select a group
Select a step
Grouping VIDEO blackboards