Filter
Top Products
33
<VRB1208>
BARCODE/COMAND STACK
CORRECTING A PREVIOUSLY INPUT
BARCODE/COMMAND STACK
Example) To change the Audio setting of step 003 from 2 to 1
1. Press the button.
÷ “BARCODE/COMMAND” is displayed.
2. Press the button.
÷ The Barcode/Command Stack screen is displayed.
3. Select “NO” with the or button and press
the button.
÷ The Barcode/Command Stack Input screen is displayed when the
button is pressed.
4. Press the button.
÷ The list display appears.
5. Select “003 ‰” by pressing the or button.
6. Press the button.
÷ This initiates the Barcode/Command Stack input mode.
7. Press the button to initiate the numeral input
mode.
8. Press the button 4 times to select item “AUDIO”.
9. Press button.
10. Press button.
÷ The next step’s Barcode/Command Input screen is displayed.
11.Press the button to return to the cursor mode.
12. Move the ‰ (pointer) to “SAVE” by pressing the
button and press the button.
CORRECTING A PREVIOUSLY INPUT BARCODE/COMMAND STACK
Correcting a previously input
Barcode/Command Stack
«
BC/COMMAND STACK GROUP 001: 003
TITLE 05
SEARCH CHAPTER 03
MARK CHAPTER 05
SUBTITLE 03
AUDIO 2
ANGLE 1
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001: 003
TITLE 05
SEARCH CHAPTER 03
MARK CHAPTER 05
SUBTITLE 03
AUDIO 1
ANGLE 1
SAVE DEL INS EXIT
CAUTION:
To save the corrected information, move
‰
(pointer) to
the last item (ANGLE in this example) by pressing the
button repeatedly.
Press the
button one more time to move to the
page for the next step.
In this “next step”, move
‰
(pointer) to SAVE and press
the
button to save data.
The corrected information is not saved if
‰
(pointer) is
moved to SAVE and the
button is pressed before
the end of correction (in the middle of the step being
corrected).