Filter
Top Products
<VRB1208>
24
This player can be used as follows using the Barcode stack/
Command stack function
÷ Commands in the barcode book included with the disc
can be memorized in the player in advance. (Barcode stack
function.)
÷ Barcodes can be set using the provided remote control
for discs that do not have barcodes, or for commands that
you want to use that are not provided with barcodes.
(Command stack function.)
÷ The remote control can be used for recall and successive
execution or step by step execution of memorized content.
CAUTION:
In the case of laser barcode compatible discs, barcodes
for industrial LD use can be used as is (please check
that such discs include the
mark). Use of the LB
barcode sheet for unmarked discs is not possible.
CAUTION:
The Barcode stack/Command stack function will not
operate with CDs.
NOTE:
The maximum number of steps that can be memorized in
the player is 300 steps including video blackboards.
BASIC USAGE
How to use the barcode stack/command stack function is
indicated as follows:
1) Display the barcode stack/command stack
setup screen with the remote control
\ Page 25
2) Input the barcode with the barcode reader and
transmit to player \ Page 26
÷ Input can also be done with the remote control unit.
In the case of LaserBarcode compatible discs \ page30
In the case of regular DVD discs \ Page26~29
3) Repeat step 2 in the desired playback order.
4) When input is finished, store in the player’s
memory \ Page 31
5) Execution \ Page42, 43
BARCODE STACK/COMMAND STACK FUNCTION
INTRODUCTION
ADVANCED USAGE
With the barcode stack/command stack function of this unit,
groups can be divided and memorized without influencing
previously input commands.
This is convenient for separate memorization of contents of
more than one disc, or when one player is being jointly used
by many people.
To register a group separate to the already previously
memorized content
1) Register a new group \ Page 35
“GROUP 002” on the top right of the barcode stack/
command stack input screen is the group number that
will be memorized.
As the group number will be important for execution,
please make a note of it so that you do not forget it.
2) Input the barcode with the barcode reader and
transmit to player \ Page 26
÷ Input can also be done with the remote control unit.
In the case of laser barcode compatible discs \ Page 30
In the case of regular DVD discs \ Page 26~29
3) Repeat step 2 in the desired playback order.
4) When input is finished, store in the player’s
memory \ Page 31
5) Execution \ Page 42, 43
At this time please select the group number that was
noted in step 1.
NOTE:
Commands stored in the player’s memory can be grouped
together or divided
\
Page 38~41.
Please note, however, that the order of commands can not
Introduction