Filter
Top Products
43
<VRB1208>
BARCODE/COMAND STACK
RECALLING/EXECUTING PREVIOUSLY INPUT
BARCODE COMMANDS FROM THE LIST VIEW
1. Press the button.
2. Press the button.
3. Press the button.
÷ The button is defeated unless the function mode is switched
off.
4. Press the button.
÷ This displays a list of commands.
5. Select a group by pressing the or button.
÷ Select the command group containing the command(s) to be
executed.
6. Select a step by pressing the or button.
÷ Select the command step to begin execution with. If the command
step number is left to “001” in this step, the commands in the
entire command group will be executed.
7. Press the or button.
÷ Pressing the button starts consecutive execution.
÷ Pressing the button starts step-by-step execution.
Some titles may not be able to be recalled and executed.
Example)
The search command cannot be executed with a title that does not
show the chapter, time and similar information on the screen or with
a disc that is not permitted to use the search function.
USING A BARCODE/COMAND STACK
BC/COMMAND STACK GROUP 001/ 003
001 PLAY
002 03:123000–129000
003 05:03–07 03 2 1
004
005
006
007
008
BARCODE/COMMAND STACK screen
Recalling/executing previously input barcode
commands FROM THE list VIEW