Filter
Top Products
<VRB1208>
28
BARCODE/COMMAND STACK SETTING
Example 4) To input the command for setting Subtitle 1, Audio 2
and Angle 3
1. Press the button.
÷ The TITLE number will blink.
2. Press the while the TITLE digits are blinking.
3. When the SUBTITLE digits start to blink, press
then .
4. When the AUDIO digit starts to blink, press .
5. When the ANGLE digital starts to blink, press .
÷ With a play command that specifies the start and end frames, it is
not possible to set the subtitle, audio and angle simultaneously.
However, by placing the subtitle, audio and angle setting command
as described above before the frame section play command, the
section playback can be executed with the specified setting.
The input as shown above allows to play title 3 frames 10000 to 15000
by setting Subtitle 1, Audio 2 and Angle 3.
With commands other than the frame section play command, such
as the frame search, chapter search and chapter section play
commands, the specified setting is valid within each command.
BC/COMMAND STACK GROUP 001: 001
TITLE 00
SEARCH FRAME 000000
MARK FRAME - - - - - -
SUBTITLE 01
AUDIO 2
ANGLE 3
SAVE DEL INS EXIT
Pressing the button switches
over to the following display.
BC/COMMAND STACK GROUP 001/ 001
001 SUBTITLE 01 AUDIO 2 ANGLE 3
002 03:10000–15000
003
004
005
006
007
008
SAVE DEL INS EXIT
Barcode/Command Stack Setting
BC/COMMAND STACK GROUP 001: 001
TITLE 03
SEARCH FRAME 123000
MARK FRAME 129000
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001: 002
TITLE 00
SEARCH FRAME 000000
MARK FRAME - - - - - -
SUBTITLE *
AUDIO *
ANGLE *
SAVE DEL INS EXIT
BC/COMMAND STACK GROUP 001: 002
REPEAT
SAVE DEL INS EXIT
Example 5) To repeat “Play Title 3 frames 123000 to 129000”
in Example 2
1. Perform steps 1 to 6 in Example 2.
÷ The BARCODE/COMMAND STACK input screen of the next
step appears.
2. Press the button while the title number is
blinking.
3. Press the button.
÷ The REPEAT indicator appears on the screen.