Filter
Top Products
<VRB1208>
42
USING A BARCODE/COMAND STACK
BC/COMMAND STACK GROUP 001: 001
Switch the command group.
BC/COMMAND STACK GROUP 001: 001
Recall screen
RECALLING/EXECUTING BARCODE
COMMANDS IN MEMORY
To execute a barcode command group:
Place the disc containing commands on the disc tray.
1. Press the button.
2. Press the button.
3. Press the button.
4. Input the number of the command group to be recalled/
executed using the numeric buttons.
5. Press the button twice.
÷ This recalls and executes the selected group.
TO EXECUTE STEPS IN A COMMAND GROUP
1. Press the button.
2. Press the button.
3. Press the button.
4. Input the number of the command group to be recalled/
executed using the numeric buttons.
5. Press the button.
÷ To re-enter the group number, press the button.
6. Input the number of the step to begin execution using
the numeric buttons.
7. Press the button.
÷ This recalls and executes the selected and subsequent steps in
the selected group.
NOTES:
÷
Pressing the button while the FUNCTION indicator is lit
repeats the execution of the set command.
÷
If you press the button in place of the button in step
6 above, command steps will be executed step by step. After every
step has been executed, press the
button to advance to the
next step. Pressing the button allows you to return to the
previous step.
Recall screen
Switch the command step.
Using a Barcode/Comand stack