Pioneer DVD-V7200 DVD Player User Manual


 
27
<VRB1208>
BARCODE/COMAND STACK
BARCODE/COMMAND STACK SETTING
Example 2) To “Play Title 3 Frames 1230000 to 129000”
1. Press the button.
÷ The TITLE number will blink.
2. Press the button to initiate the numeral input
mode.
3. Press to select SEARCH FRAME.
÷ This item sets the frame number where playback should start.
÷ Each press switches “CHAPTER” and “FRAME” alternately.
4. Press = = = = =
= .
÷ This sets the start frame number.
÷ If the operation up to the present has been performed during
playback, the input start frame is searched now.
5. Press = = = = =
= .
÷ This sets the end frame number. Now go to the next step.
6. Press the button to return to the cursor mode.
÷ If the operation in steps 4 and 5 is performed during playback,
you can press in place of specifying the frame number
in steps 4 and 5 above. In this case, the frame number being
played is input automatically.
Example 3) To “Play Title 5 Chapters 3 to 7 with Subtitle 3, Audio
2 and Angle 1”
1. Press the button.
÷ The TITLE number will blink.
2. Press the to initiate the numeral input mode.
3. Press = .
÷ This sets title 5 and the frame input mode starts.
4. Press to select SEARCH CHAPTER.
÷ This item sets the chapter number where playback should start.
÷ Each press switches “CHAPTER” and “FRAME” alternately.
5. Press = .
÷ This sets the start chapter number.
6. Press = .
÷ This sets the end chapter number.
7. Press = .
÷ This sets Subtitle 3.
8. Press . (Do not press .)
÷ This sets Audio 2.
9. Press . (Do not press .)
÷ This sets Angle 1. Now go to the next step.
10. Press the to return to the cursor mode.
BC/COMMAND STACK GROUP 001: 001
TITLE 03
SEARCH FRAME 123000
MARK FRAME 129000
SAVE DEL INS EXIT
Display when the example on the right
is input
BC/COMMAND STACK GROUP 001: 001
TITLE 05
SEARCH CHAPTER 03
MARK CHAPTER 08
SUBTITLE 03
AUDIO 2
ANGLE 1
SAVE DEL INS EXIT
CAUTION
To play chapter 7 till the end as shown in Example 3),
enter “8”, obtained by adding 1 to 7, in MARK
CHAPTER.
Barcode/Command Stack Setting
Display when the example on the right
is input