Pioneer DVR-220 DVD Recorder User Manual


 
Recording
06
49
En
5 Use the
/
(cursor left/right) to move the
cursor to the recording end time on the grid.
As you move the cursor around the grid, an arrow
stretches from the start time to the current cursor
position, representing the length of the recording. A
recording of up to six hours can be set.
6 Press ENTER to set the end time.
7 Select ‘Yes’ to set the timer recording and exit, or
‘No’ to go back to the timer recording screen.
You can check the timer recording details you just set
from the main timer recording screen (see
Standard
timer recording
below).
Note
You can’t use VPS/PDC with Easy Timer Recording.
Use the standard or VIDEO Plus+ timer recording
methods if you want to use VPS/PDC.
Standard timer recording
The timer recording screen you can see all the timer
programs already set, clear programs and set up new
ones.
1 Press TIMER REC to display the Timer Recording
screen.
You can also access the Timer Recording screen from
the Home Menu (press
HOME MENU
, select
Timer
Recording
, then
Timer Recording (View)
).
This screen shows all the timer programs currently set.
Each row is for one timer recording program, with the
date and time information, channel, recording mode
and the VPS/PDC setting.
The amount of free space available on the currently
loaded recordable DVD is shown towards the bottom
of the screen.
In the lower-right corner, the number of timer
programs already set and the number that use VPS/
PDC, is shown next to
Tmr Pgms
.
If there are more than eight timer programs already
set, press
NEXT
to switch page (go back using
the
PREV
button).
You can also clear a timer program before it’s started
(before the recorder enters timer recording standby)
by highlighting it and pressing
CLEAR
.
2 Select ‘New Input’ to set a new timer program,
then press ENTER.
3 Enter the timer recording settings.
Use the
/
(cursor left/right) buttons to select a field;
use the
/
(cursor up/down) buttons to change the
value.
Date
– Choose a date up to one month in advance, or
select a daily or weekly program.
Start
– Set the recording start time.
Stop
– Set the recording end time (maximum length
of a timer recording is six hours).
Easy Timer Recording
11:00 12:00 13:00 14:00 15:00 16:00 17:00
13/12
14/12
15/12
11:45 13:45
FINEPr 7
13/12
WED
Recording start time
Recording end time
CHANNEL
+
/
REC MODE
HOME
MENU
ENTER
CLEAR
PREV NEXT
TIMER REC
ì
New Input
WED
13/12
7:00 8:00 Pr 3
SP
Off
Date Start Stop CH
Mode
VPS/PDC
Timer Recording
DVD Remain
1h20m (SP)
1/1
VPS/PDC
Date Start Stop CH
Rec Mode
12/12 TUE
10 00 11 00 Pr 7
SP
OFF
Timer Recording
Program Set
Ttl Name Input
DVR-04_UK.book 49 ページ 2004年4月11日 日曜日 午後5時20分