Additional information
15
125
En
Screen is stretched ver-
tically or horizontally
• Make sure that the
TV Screen Size
setting (page 117) is correct for
the kind of TV you have (see also page 135).
• If you have a widescreen TV, check its aspect ratio settings.
• This recorder’s input switches into wide mode automatically
according to the input signal. When the unit connected is not
compatible with VIDEO ID-1 (widescreen signalling), set the
connected component to output 4:3 aspect ratio (standard) video.
Can’t play a disc
recorded using this
recorder on another
player
• If the disc was recorded in Video mode, make sure that it’s finalized
(page 50).
•Some players will not play recordable DVD discs, even when
recorded in Video mode and finalized.
• If the disc was recorded in VR mode, the other player must be
specifically RW compatible in order to play it (page 7).
• Discs recorded with copy-once material cannot be played on non-
CPRM compatible players (page 33).
• DVD+RW discs containing only a small amount of recorded
material may not play on other players. Finalize the disc and try again.
During playback the
picture is dark or dis-
torted
• When a copy-protected disc is played via a VCR, the picture will not
display correctly. Connect the recorder directly to your TV.
Can’t record or does
not record successfully
• Check that there is some remaining blank space on the DVD/HDD.
• For a Video mode disc or DVD+R, check that the disc isn’t already
finalized.
• Check the limits on the number of titles and chapters on a disc:
– HDD: 999 titles
– VR mode: 99 titles, 999 chapters per disc
– Video mode disc: 99 titles per disc, 99 chapters per title
– DVD+R/+RW: 49 titles per disc, 99 chapters per title (max 254
chapters per disc)
• Check that the source you are trying to record is not copy protected.
• For a VR formatted disc, check that the disc isn’t locked (page 103).
• Check that you are recording with the same TV system (PAL, NTSC,
etc.) as the disc has already been recorded in. All recordings on a disc
must be in the same TV system. When recording to the HDD, it is also
necessary to set the Input Line System setting to match what you want
to record (page 119).
• The power may have failed during recording.
Problem
Remedy
DVR640H_RLT_EN.book 125 ページ 2006年4月11日 火曜日 午後12時26分