Pioneer DVR-541H-S DVD Recorder User Manual


 
Recording
05
45
En
Timer recording FAQ
Frequently Asked Questions
Even though the timer is set, the recorder
doesn’t start recording!
Check that the disc loaded or HDD is
recordable, not locked (see
Lock Disc
on
page 103), and that there are fewer than
99/999 titles already on the DVD/HDD.
The recorder won’t let me enter a timer
program! Why not?
You can’t enter a timer program if the
clock isn’t set.
What happens when two or more timer
programs overlap?
Basically, the program with the earlier
recording start time has priority.
However, the recorder will start
recording the program with the later
start time after the earlier program is
finished. If two programs have the same
times (but different channels, for
example), the program set most recently
takes priority.
Simultaneous recording and
playback (Chase Play)
Chase Play allows you to watch a recording
that is still in progress from the start, without
having to wait until the recording has
finished (i.e., playback is ‘chasing’ the
recording).
In fact, you’re not just limited to watching
the recording in progress. You can watch
anything else already on the HDD (or on a
DVD if you’re recording to the HDD) by
selecting it from the Disc Navigator screen
(see
Using the Disc Navigator with recordable
discs and the HDD
on page 58).
DVR-640H-S/DVR-541H-S:
Chase Play is not
possible when DV is the recording input.
Imprtant
You can’t use this feature during Auto
Start Recording, or in Auto Start
Recording standby (the
AUTO
indicator
is lit in the front panel display).
Press during recording to
start playback from the beginning of the
current recording
1
.
Press during recording to
select another title to play.
You can use all the usual playback controls,
such as pause, slow-motion play, scan and
skip.
To stop playback, press
STOP
(recording will continue).
To stop recording, press
STOP REC
(playback will continue).
During recording or in timer recording
standby, you can’t play an HDD title,
DVD or Video CD/Super VCD disc if the
Input Line System setting doesn’t match
the TV line system of the disc/HDD title
(see also
Additional information about
the TV system settings
on page 119).
Also, during simultaneous recording
and playback, if the TV line system of the
playback track/title changes then
playback will automatically stop.
HDD
Note
1 You can’t start playback immediately after recording starts. Simultaneous playback and recording doesn’t work
while copying or backing up.
PLAY
DISC NAVIGATOR
DVR640H_RLT_EN.book 45 ページ 2006年4月11日 火曜日 午後12時26分