Filter
Top Products
Recording
05
39
En
7 Move the cursor to the
recording end time on the grid.
As you move the cursor around the grid, an
arrow stretches from the start time to the
current cursor position, representing the
length of the recording. A recording of up to
six hours can be set.
8 Set the end time.
9 Select ‘Yes’ to set the timer
recording and exit, or ‘No’ to go back to
the Easy Timer Recording screen.
• You can check the timer recording
details you just set from the main timer
recording screen (see
Setting a manual
timer recording
on page 41).
Timer recording using the G-
Code™ programming system
This system makes programming timer
recordings very simple. Most TV guides
publish G-Code programming numbers with
their program details. If you want to make a
timer recording of a program, you just input
the corresponding code. The date, start, stop
and channel settings are made
automatically. All you have to do is tell the
recorder the recording mode, and whether
it’s a once-only recording or a regular
recording.
Note that if the country setting is incorrect
(set in the Setup Navigator), timer
recordings made using the G-Code
programming system may not work as
expected.
1 Press ‘G-Code’ to display the G-Code
program screen.
You can also access this screen from the
Home Menu (press
HOME MENU
, select
Timer Recording
, then
G-Code system
).
• Use the number buttons to enter the G-
Code programming number. (To clear
the last digit entered, press
CLEAR
.)
• You can also use the
///
buttons to select digits from the on-
screen display.
2 After making the settings, select
‘Enter’ and press ENTER.
The timer recording screen appears with the
timer program you just set.
3 Confirm that the settings are correct.
If the channel number isn't displayed, use
the
/
buttons to highlight
CH
, then use
the
/
buttons to set the correct channel
number.
Easy Timer Recording
Pr 7
SAT 1/01
11:45
HDD
HDD/DVD
SP
REC MODE
11:00
12:00 13:00 14:00 15:00 16:00 17:00
– 13:45
1/01
2/01
3/01
Recording start time
Recording end time
ENTER
G-Code#
1 3
4 5 6
7 8 9
0
Clear Enter
Detail
Cancel
2
DVR640H_RLT_EN.book 39 ページ ２００６年４月１１日 火曜日 午後１２時２６分