Pioneer DVR-541H-S DVD Recorder User Manual


 
Copying and backup
08
86
En
Copying from DVD to HDD
Important
The DVD to HDD Copy screen isn’t
accessible when a finalized Video mode
disc or a DVD-Video is loaded. As long as
the disc is not Copy Guard protected, you
can still use the One Touch Copy
function, however (See
One Touch Copy
on page 81).
The recorder can only store one Copy List
at a time.
The Copy List will be erased if:
– any of the titles on the DVD disc are
erased or edited.
– the disc tray is opened.
– playback is switched between Play List
and Original.
– the DVD disc is re-initialized or
finalized.
– the recorder is reset to its factory
settings (see
Resetting the recorder
on
page 138).
It may not be possible to copy from a
DVD disc that was recorded on a
different DVD recorder or a PC.
1 Select ‘Copy’ from the Home
Menu.
2 Select ‘DVD/CD
HDD’.
3 Select a Copy List type.
Selecting
Create New Copy List
will
erase any Copy List already stored in the
recorder.
4 Add titles to the Copy List
(highlight a title and press ENTER to add).
Titles you’ve added to the Copy List are
highlighted in pink.
5 Select ‘Next’ from the
command menu panel to proceed to the
title edit screen.
6 Select a title to edit.
A menu appears of Copy List editing
commands:
Erase
– Erase individual titles from the
Copy List (see
Erase
on page 70).
Move
– Change the order of titles in the
Copy List (see
Move
on page 77).
Preview
– Check the content of a title in
the Copy List.
Cancel
– Exit the menu.
Repeat this step for as many titles you have
that need editing.
7 Select ‘Next’ from the
command menu panel to proceed to the
copy options screen.
Select
Recording Mode
if you want to
change the recording quality (see
Recording Mode
below).
8 Select ‘Start Copy’ to start
copying.
HOME
MENU
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
DVR640H_RLT_EN.book 86 ページ 2006年4月11日 火曜日 午後12時26分