Filter
Top Products
27
4. Installing and Using Software
2. Left-click on the CBdrvU icon in the task tray to open the pop-up menu shown below.
[Overview]
Current Resolution: Indicate current resolution
Calibration: Open a screen for adjusting pen tip and cursor position
Property: Perform pen settings
Hardware Information: Select to view test information, use the Rotate mode, disable CBdrvU functions
Help: Open Help
About: Show CBdrvU
Exit: Exit CBdrvU
3. Select “Hardware Information” in the menu in Step 2 above to open the submenu shown below.
[Overview]
Test Mode: Select to check system functions and verify SelfTest and other operations.
Rotation Mode: Show current rotate mode
Disable CBdrvU: Enable/disable CBdrvU operation
b) Hot key operations
1. Use the following key combination to open the “Select Calibration Dialog”.
In the default setting, press the [Ctrl], [Shift] and [C] keys on the keyboard simultaneously to open this screen.
This screen allows you to adjust pen tip and cursor position.
2. Use the following key combination to switch the screens.
In the default setting, press the [Ctrl], [Shift] and [X] keys on the keyboard simultaneously to open this screen.
This setting allows you to switch between screens set to current resolution.
Note:
The hot keys described above can be modified in the “Select Calibration Dialog”.