Filter
Top Products
36
4. Installing and Using Software
4.4 Precautions
a) Use of video cards other than recommended
A video card other than those recommended for use with CBdrvU must be calibrated from the Select Calibration Dialog
(Detail-1). For information on recommended computers and video cards, consult a Pioneer dealer.
b) Easy Setting
Easy Setting is optimized for PDP-504CMX/PDP-50MXE1/PDP-50MXE1-S and Microsoft Windows XP.
Cursor position may slip due to due to video card adjustment or characteristics, plasma display adjustment or
discrepancies. Should this happen, perform calibration from the “Select Calibration Dialog” (Detail-1).
Easy Setting cannot make settings at resolutions above 1024 x 768 and a vertical frequency of 60 Hz. Use Detail-1 from
the “Select Calibration Dialog” to perform such settings.
c) Driver
The driver is optimized for the Pioneer handwriting device and pen. Some of the functions provided by this hardware
combination may not be provided by other hardware combinations.
DUAL displays are not supported.
d) Initial plasma display settings
The factory default for PDP-504CMX/PDP-50MXE1/PDP-50MXE1-S is “XGA” (“SETUP” = “SIGNAL Format” =
“XGA”). Use the “WXGA” for Cyberboard. Note that some Easy Setting modes may differ when the “XGA” is used.
e) Screen saver
Some screen savers automatically change the resolution, for example, “3D Maze (OpenGL)”. Thus the system assumes
the user has changed the resolution and displays a message prompting the user to calibrate the pen each time the
screen saver starts. Should this happen, change to another screen saver or disable recognition of changes in resolution.
f) Media player
Some media players automatically change screen resolution in full screen mode and shows a message prompting pen
calibration when leaving full screen mode. Should this happen, disable visual effect settings or recognition of changes in
resolution.
g) HTML optimization
Some set values may interfere with normal operation, check before use.
h) Pen operation in Welcome Login screen
Pen position may shift in the login screen of Windows 2000 and Windows XP.
Should this happen, use the mouse or keyboard for logging in.
i) Portrait installation of plasma display
Portrait installation is described on the assumption that it will be performed by a competent professional engineer with
sufficient training and skill to carry out proper installation. Ask your dealer or other authorized personnel to perform
installation.
Pioneer cannot accept liability in cases where the equipment is damaged due to inappropriate installation location,
improper assembly, installation, setup, operation, renovation, or by natural disasters.