Filter
Top Products
En
Section
05
English
27
<J2L90901B>
Changing the Settings (Initial Settings)
27
Operating the Initial Settings
menu
Initial Settings cannot be selected during
playback. Stop the disc first.
1 Display the Home Menu.
Press HOME MENU.
2 Select Initial Settings.
Use /
/
/
to select, then press ENTER.
3 Select the item and change the setting.
Use /
/
/
to select, then press ENTER.
Notes
HDMI Out, HDMI Resolution and
HDMI Color can only be set when the player
is connected to an HDMI-compatible device
using an HDMI cable (DV-420V only).
Digital Audio Out and Component Out
cannot be set when the player is connected to
an HDMI-compatible device using an HDMI
cable (DV-420V only).
Setting the Component Out and
HDMI Resolution settings back to
their defaults
1 Turn the player’s power off.
Press STANDBY/ON.
2 Press STANDBY/ON while pressing
.
Use the buttons on the player’s front panel.
The power turns on.
Restoring all the settings to the
defaults
1 Turn the player’s power off.
Press STANDBY/ON.
2 Press STANDBY/ON while pressing .
Use the buttons on the player’s front panel.