Filter
Top Products
En
Section
05
30
<J2L90901B>
Changing the Settings (Initial Settings)
30
Options settings Settings
Component Out
Progressive
Select this when a TV or projector supporting progressive video
signals is connected to the COMPONENT VIDEO OUT terminals.
PRGSVE appears on the front panel display.
Interlace
Select this when a TV or projector that does not support progres-
sive video signals is connected to the COMPONENT VIDEO OUT
terminals.
When Progressive is selected and ENTER is pressed, a confirmation message appears. To change the setting,
select Yes then press ENTER. If you do not want to change the setting, select No then press ENTER.
The picture may be disturbed when switching between Progressive and Interlace.
When HDMI Resolution is set to 720x480i/720x576i, Interlace is set (DV-420V only).
If the picture no longer appears after changing the setting to Progressive, set it back to Interlace. For instruc-
tions on how to do so, see Setting the Component Out and HDMI Resolution settings back to their defaults on
page 27.
HDMI Resolution
(DV-420V only)
720x480i/
720x576i
720 x 480 pixel (NTSC)/
720 x 576 pixel (PAL) interlaced images are
output.
720x480p/
720x576p
720 x 480 pixel (NTSC)/
720 x 576 pixel (PAL) progressive images
are output.
1280x720p
1 280 x 720 pixel progressive images are output.
1920x1080i
1 920 x 1 080 pixel interlaced images are output.
1920x1080p
1 920 x 1 080 pixel progressive images are output.
When the setting is changed, the picture may be disturbed or some time may be required for it to appear.
When the setting is changed, a confirmation message appears. If the picture is properly displayed, select Yes
then press ENTER. If it is not properly displayed, select No then press ENTER.
If the picture no longer appears after changing the setting, set it back to 720x480p/
720x576p. See Setting the
Component Out and HDMI Resolution settings back to their defaults on page 27.
HDMI Color
(DV-420V only)
Full range RGB
The colors become denser. Select this if dark colors seem dis-
played in a uniform black.
RGB
The colors become lighter. Select this if the dark colors seem too
light.
Component
Select this when connected to an HDMI-compatible TV. The sig-
nals are sent in color difference (8-bit) format.
The settings can only be changed when the player and HDMI-compatible device are connected using an HDMI
cable.
The factory default settings are indicated in italic.
Language settings
Some discs will not change to the selected language.
On some discs, the language is changed on a menu screen. For such discs, change the
language on the menu screen.