Filter
Top Products
En
Appendix
06
English
39
<J2L90901B>
Additional information
39
Problem Check Remedy
KURO LINK function does not
work.
Is the HDMI cable you are using a
High Speed HDMI cable?
Use a High Speed HDMI cable. The KURO
LINK function may not work properly if
HDMI cable other than a High Speed
HDMI™ cable is used.
Is KURO LINK set to On on the
player?
Set KURO LINK to On on the player (page
32).
Does the connected device sup-
port the KURO LINK function?
The KURO LINK function does not work with
devices of other brands, even if connected
using an HDMI cable.
The KURO LINK function will not work if
devices that do not support the KURO LINK
function or devices of other brands are con-
nected between the KURO LINK-compatible
device and the player.
Even when connected to a Pioneer product
compatible with the KURO LINK function,
some of the functions may not work.
Also refer to the operating instructions of
the connected device.
Is KURO LINK set to On on the
connected device?
Set KURO LINK to On on the connected
device. The KURO LINK function operates
when KURO LINK is set to On for all devices
connected to the HDMI OUT terminal. Once
connections and settings of all the devices
are finished, be sure to check that the play-
er’s picture is output to the Flat Screen TV.
(Also check after changing the connected
devices and connecting and/
or disconnect-
ing HDMI cables.) If the player’s picture is
not being output to the Flat Screen TV, the
KURO LINK function may not work properly.
For details, refer to the operating instruc-
tions of the connected device.
Are multiple players connected? The KURO LINK function may not work if
three or more players, including this player,
are connected by HDMI cable.
The message CEC200 appears. Is the player’s power turned off? When the Disc Navigator is selected using
the Flat Screen TV’s remote controller, the
message CEC200 is displayed if the player’s
power is turned off.
This is not a malfunction. You may continue
using the player and Flat Screen TV as such.