Filter
Top Products
En
Section
05
28
<J2L90901B>
Changing the Settings (Initial Settings)
28
Digital Audio Out settings
Options settings Settings
HDMI Out
(DV-420V only)
LPCM (2CH)
Multichannel audio signals are converted to 2-channel linear PCM
audio signals for output. This can be selected when the connected
HDMI-compatible device does not support multichannel audio.
Auto
Audio signals supported by the connected HDMI-compatible
device (Dolby Digital, DTS, MPEG and linear PCM) are output.
Audio signals not supported by the connected HDMI-compatible
device are converted to linear PCM for output.
Off
No audio signals are output from the HDMI OUT terminal.
The settings can only be changed when the player and HDMI-compatible device are connected using an HDMI
cable.
If the connected HDMI-compatible device is not compatible with DTS audio, the DTS audio signals are not
output (the DTS audio signals are not converted to linear PCM signals for output).
Digital Out
On
Audio signals are output from the DIGITAL AUDIO OUT (COAX-
IAL/
OPTICAL) terminals.
Off
No audio signals are output from the DIGITAL AUDIO OUT
(COAXIAL/
OPTICAL) terminal.
When Digital Out is set to Off, the audio signals output from the HDMI OUT terminal are converted to linear PCM
(DV-420V only).
Dolby Digital Out
Dolby Digital
Dolby Digital audio signals are output. Select this when the con-
nected AV receiver or amplifier supports Dolby Digital audio.
Dolby Digital > PCM
Dolby Digital audio signals are converted to linear PCM audio
signals for output. Select this when the connected AV receiver or
amplifier does not support Dolby Digital audio.
DTS Out
DTS
DTS audio signals are output. Select this when the connected AV
receiver or amplifier supports DTS audio.
Off
DTS audio signals are not output. Select this when the connected
AV receiver or amplifier does not support DTS audio.
When the connected AV receiver or amplifier does not support DTS audio, set Off. Noise may be generated if DTS
is set.
96 kHz PCM Out
96kHz > 48kHz
96 kHz audio signals are converted to 48 kHz/
44.1 kHz audio
signals for output. Select this when the connected AV receiver or
amplifier does not support 96 kHz audio.
96kHz
96 kHz audio signals are output. Select this when the connected
AV receiver or amplifier supports 96 kHz audio.
MPEG Out
MPEG
MPEG audio signals are output. Select this when the connected
AV receiver or amplifier supports MPEG audio.
MPEG > PCM
MPEG audio signals are converted to linear PCM audio signals for
output. Select this when the connected AV receiver or amplifier
does not support MPEG audio.
The factory default settings are indicated in italic.