Filter
Top Products
15
CONTROL
DIGITAL
OPT.
OUT
VIDEO
RL
S-VIDEO
COMPONENT
VIDEO OUT
MASTER-SLAVE
CONTROL
CD-DECK
SYNCHRO
YP
B
P
R
VIDEO SELECT
OUT
IN
OUT
OUT
SLAVE
MASTER
IN
IN
OUT
IN
OUT
IN
AUDIO
VIDEO IN
S-VIDEO IN
VIDEO SELECT
AUDIO IN
RL
Making
Connections
Connection Guide
The illustration on this page shows the basic setup using
the audio and video cords included with this player. Use
this illustration as a guide to setting up your home
system.
An explanation of each type of audio and video
connection available can be found on pages 17 and 18.
To determine the best audio and video connection setup
for your system, refer to the manuals supplied with the
components you are making connections to.
In addition to making physical connections to your TV or
monitor, it is also necessary to assign the TV screen size.
You can use the [Setup Navigator] in the Setup screen
General menu to set whether you are using a wide
screen or standard size TV or monitor (page 21).
Additionally, you can use the [TV Screen] setting in the
Setup screen Video menu (page 43).
Notes
• When making connections to this unit or when changing
connections, check that the unit is off by pressing
STANDBY/ON and unplug the power cord from the power
outlet.
• The video outputs on this player uses copy protect circuitry to
prevent the video playback on DVDs from being copied. If you
connect the player to a TV via a VCR, or record and play back
the contents of a disc with a VCR, the playback picture may
not be normal.
Connecting Your DVD Player
Unlike any other audiovisual media format, DVD offers a
wide array of audio and video output options which
allows playback to be enjoyed in any number of system
configurations from a standard TV with stereo audio
input to a home theater system with a projection
monitor and full surround sound capabilities.
Connecting two DV-F727 players?
If you have chosen to purchase two DV-F727 players for
combined control of up to 601 discs, make connections
to the player to be used as the Master player following
the procedures in this section. When connections are
complete, refer to page 66 for a description of how to
connect the Slave player.
Audio cord
(Included)
Video cord
(Included)
TV or monitor
1 Make video connections from the VIDEO OUT jack on the player to the VIDEO IN jack on the TV or
monitor using the video cord included with the player (page 18).
2 When using the VIDEO OUT jack, set VIDEO SELECT to the top position.
3 Make audio connections from the AUDIO OUT jacks on the player to the AUDIO IN jacks on the TV or
monitor using the stereo audio cord included with the player. Be sure to match the color of the plugs
with the color of the jacks (red and white) (page 17).
4 After all connections have been made, connect to a power outlet.
NAMES AND FUNCTIONS / MAKING CONNECTIONS
4
1
2
3