Filter
Top Products
31
Text
Auto UpdateCustom
Update the menu for all discs
The player turns off when finished
i
Move
SUB SETUP
Exit
ENTER
Select
Add. Disc Update
All Disc Update
DISC MANAGEMENT
To performing Add. Update using controls on
the front panel
Press UPDATE on the front panel repeatedly until “Add.
Update” appears in the display window, then press the enter
button.
To proceed to the next disc without inputting
text information for the current disc
During Add. Update, if you do not want to input either
title or artist information, use the cursor control joystick
to move the cursor to “OK” and press ENTER. When
this is done for both the disc title and artist’s name,
proceed with step 6 in the procedure on the previous
page. Text information can be input later using the Sub
Setup screen Text menu.
To cancel Add. Update
Press STOP 7.
When the Add. Update procedure is canceled,
information that has already been input will be stored in
memory. However, because the information is not
officially registered until the system is put in standby, if
the power cord is unplugged, or the main power to the
player is cut, this information may be erased.
Keeping the Disc Order and
Information Updated
The player has the ability to store information for as many
as 330 discs. After the information on the discs loaded in
the player has been registered in the player’s memory,
even if the discs in the rack are reorganized or if as many
as 30 discs are removed from the rack, the player will
maintain the information in memory. When the discs are
restored to the player, regardless of order, the appropriate
information (input text information, etc.) is applied to each
disc when All Disc Update is performed.
1 Press SUB SETUP.
2 Move the cursor control joystick to the right to
select the Auto Update menu.
3 Move the cursor control joystick down to
select [All Disc Update].
4 Press ENTER.
• “Auto Update” is displayed as the rack starts to
rotate as each new disc is read by the player. It
takes between 10 and 20 seconds for the player
to read a single disc.
• When All Disc Update is complete, the player
turns off automatically. This is not a malfunction.
To performing Add. Update using controls on
the front panel
Press UPDATE on the front panel repeatedly until “All Update”
appears in the display window, then press the enter button.
To cancel All Update
Press STOP 7.
When the All Update procedure is canceled, none of the
updated information is retained in memory.
Inputting and Changing Text
Information
Disc titles and artist names can be input for all the discs
loaded in the player. This information is displayed when
the disc is played and is also used when performing
searches.
Input information can be as long as 12 characters using
your choice of letters, numbers and symbols. Characters
can be input using controls on the front panel or remote
control unit, and can also be directly input using a PS/2
compatible keyboard or mouse if connections are made
to the KEYBOARD/MOUSE jack on the front panel.
Notes
• The input text information is not actually stored in the player’s
memory until the power has been put in standby. If information
has been input, and the power cord is unplugged or the main
power to the player is cut, the information may be erased.
• Text information cannot be input for the disc in the single
loader slot.
continued
4¢ 1
87
eE
¡
3
4
(ENTER)
2,3
(Cursor)
1