Filter
Top Products
67
3 Make video connections from the Slave player
to either the VIDEO IN or S-VIDEO IN jacks
corresponding to the type of video
connections made from the Master player to
the TV or AV component.
• This player does not perform any processing of
the video signals. Therefore, video signals input
at the VIDEO IN jacks are not output from the
S-VIDEO OUT jacks, and video signals input at
the S-VIDEO IN jacks are not output from the
VIDEO OUT jacks.
• Component video connection from the Slave
player is not possible.
Video connections
When composite video connection is made to a TV
or monitor, make composite video connections
from the VIDEO OUT jack on the Slave player to the
VIDEO IN jack on the Master player.
S-video connections
When S-video connection is made to a TV or
monitor, use a commercially available S-video cable
to make S-video connections from the S-VIDEO
OUT jack on the Slave player to the S-VIDEO IN jack
on the Master player.
VIDEO
OUT
IN
VIDEO
OUT
IN
Slave DV-F727 player
S-VIDEO
OUT
IN
S-VIDEO
OUT
IN
Slave DV-F727 player
After Master-Slave connections
have been made between two
DV-F727 players
After connections between the two units have been
made, when the power is turned on, “-MASTER-” will
appear in the display window of the Master player and
“–SLAVE–” will appear in the display window of the
Slave player, and the two players will perform as a single
unit.
Getting both players set up...
After connections have been made, it is recommended
to use the Setup Navigator for simultaneous setup of
both players. Settings made in the Setup Navigator are
applied to both players, however, the settings in the
Setup screen are applied to each player separately.
When Setup screen settings are changed during
playback, the setting is applied to the operating player.
Because some settings cannot be changed during
playback, stop disc playback before attempting to make
changes.
Notes
• The power of the Slave player is turned on and off when the
Master player is turned on and off.
STANDBY/ON on the Slave player will not work.
• The remote control will not operate when it is pointed at the
Slave player. Point the remote control at the Master player to
control the Slave player.
• The only button that can be used on the Slave player is
OPEN/CLOSE to open and close the hood on the Slave player.
• When loading discs in the players, discs in the Master player
are numbered from 1 to 300 and discs in the Slave player are
numbered from 301 to 600.
• Single loader play on the Slave player is not possible.
• Make system control connections and CD-Deck synchro
connections to the Master player only. Even after CD-Deck
synchro connections are made to the Master player, the Slave
player playback cannot be used for the CD-Deck synchro
function.
• When connecting a commercially available PS/2 compatible
keyboard or mouse for text input and other player functions, be
sure to make connections to the Master player only.
• When Update All is performed, both players start at the same
time, and are shut off when the player with more discs has
finished the updating process. When Update Add is performed,
the discs in the Master player are updated first, followed by
the discs in the Slave player, and then both systems are
restarted simultaneously.
To a TV or monitor
To a TV or monitor
ADVANCED FUNCTIONS