Filter
Top Products
51
Adjusting the picture quality settings
4 ¢ 1
87
e E
¡
3
1
2,4,5,6
(Cursor)
3,7
(ENTER)
DISPLAY
1 Press DNR.
2 Move the cursor control joystick down to
select “Video Setup”.
3 Press ENTER.
4 Move the cursor control joystick up or down
to select the setting to adjust.
The settings rotate in the following order.
DNR: Adjust to control the amount of signal noise in
the luminance component of the video signal.
Sharpness: Adjust the clarity of the picture.
Detail: Adjust the edges in the picture.
Gamma: Adjust the brightness of the darker
images in the picture.
Chroma Delay: Adjust the delay of the Y
(luminance) and C (color) components of the video
signal.
Memory: Select a memory location at which to
save your settings.
5 Move the cursor control joystick right or left to
adjust the settings.
If a DVD or Video CD is playing, the changes will be
visible on the screen as they are adjusted.
6 Repeat steps 3 and 4 to make adjustments to
other settings.
If you would like to save the settings in the player’s
memory, be sure to select either “1”, “2”, or “3” in
the [Memory] setting to establish which memory
location to save the new settings in. Please note
that if you select a location where settings have
already been saved, the old settings will be
replaced by the new ones.
7 When you are finished making adjustments,
press ENTER to establish the new settings.
To display all of the settings at once
Pressing DISPLAY while the picture quality setting
adjustment screen is displayed enables all of the current
settings to be viewed on one screen. Adjustments may
also be made when this screen is displayed, by moving
the cursor control joystick up and down to select a
setting, and right and left to adjust the selected setting.
Note
If the Setup screen is opened during playback of a DVD being
viewed in the letter box format, the screen may switch to the
wide screen format. This is not a malfunction, and the screen
will return to normal when the Setup screen is closed.
Move
DISPLAY
DNR
Check
ENTER
Select
min max
Move
DISPLAY
Memory
Check
ENTER
Select
Off 3
21
Memory
Off 3
21
DNR
min max
Sharpness
–+
Detail
min max
Gamma
–+
Chroma Delay
–+
ADVANCED FUNCTIONS