Pioneer PDP-5080HD Flat Panel Television User Manual


 
32
En
Basic Operations
06
In 2-screen or picture-in-picture mode, press SWAP to
switch the position of the two screens shown.
Left screen is the active screen which will be indicated by
”. The user is allowed to operate picture and sound.
In picture-in-picture mode, press SHIFT to move the
position of the small screen in anti-clockwise.
2 To select the desired input source, press the appropriate
input source button.
If watching TV programs, press CH +/– to change the
channel.
Note
•The SPLIT button is disabled while the TV Guide On Screen™
system is displayed.
The multiscreen function cannot display images from the
same input source or two external input sources at the same
time. If you make such an attempt, a warning message
appears.
When you press HOME MENU, the single-screen mode is
restored and the corresponding menu is displayed.
When the two screens show the same analog broadcasting
coming through antenna A and B, the picture quality may differ
between the two screens.
Displaying pictures in multi-screen mode for an extended
period may cause an after-image.
Freezing images
Use the following procedure to capture and freeze one frame
from a moving image that you are watching.
1 Press FREEZE.
A still image appears on the right screen while a moving
image is shown on the left screen.
2 Press FREEZE again to cancel the function.
Note
With the screen split, any image cannot be frozen.
When you try to use this function when it is not available, a
warning message appears.
Image FREEZE is canceled automatically if you do not perform
any operation for five minutes.
Displaying pictures in FREEZE mode for an extended period
may cause an after-image.
Moving image Still image
PDP5080HD.book Page 32 Monday, April 9, 2007 7:49 PM