85
En
Useful Remote Control Features
14
English
CBL/SAT control buttons
When the Mode switch is set to CBL/SAT, the cable converter or
satellite broadcast tuner connected to the display can be
operated using the buttons shown below (3, 4, 5, 8 and 9 for
cable converters and 1 to 7 for satellite tuners):
1. SAT MENU
Displays the satellite broadcasting menu screen.
2. ENTER, / / /
ENTER: Activates the selected function.
///: Selects items on the SAT GUIDE screen or SAT
MENU screen.
3. 0 to 9
Press a button (or buttons) that corresponds to the channel
that you want to watch.
4. CH +/–
Selects a higher or lower channel.
5. SOURCE
Turns the equipment power on and off.
6. SAT GUIDE
Displays the satellite broadcasting guide screen.
7. RETURN
When the CBL/SAT menu is displayed, restores the
immediately previous screen.
8. CH ENTER*
Enters the selected channel with the direct channel
selection buttons.
9. CH RETURN*
Switches between the current channel and the channel you
were watching immediately before.
* Some cable converter manufacturers do not preset CH
ENTER and CH RETURN.
Note
• CABLE and SAT cannot be selected at the same time.
4
8
7
6
3
5
2
1
9
Mode switch
(with “CBL/SAT”
selected)
PDP5080HD.book Page 85 Monday, April 9, 2007 7:49 PM