Filter
Top Products
UN IVERSAL REMOTE BUTTONS (CRK76TK1)
LED
ON.OFF Turns the device you are controlling on or off. When pressed
twice within two seconds, all devices that are on will be turned off (this
feature only works with most RCA, PROSCAN, and GE products). You can
also use the ONoOFF button on the front panel of the TV to turn it on
or off.
VCR When programmed, tells the remote to control the VCR.
TV Tells the remote to control the TV.
DVD Tells the remote to control the DVD player. Note that this button
is only functional with GE, RCA, and PROSCAN DVD players.
VCR2 When programmed, tells the remote to control a second VCR.
LED This light turns red at each valid button press. When
programming the remote control, it flashes or turns on or off to indicate
programming status.
AUX Acts as a "wildcard" button. It can be programmed to control
another VCR, TV, satellite receiver or cable box. Or, it can be
programmed to control an RCA, GE, or PROSCAN audio device. Follow
the direct entry programming instructions, later in this section, to
program this button.
DIRECTV When programmed, tells the remote to control the digital
satellite receiver.
MUTE When programmed, reduces the TV's volume to its minimum
level. Press again to restore the volume.
SKIP (Commercial Skip) If you press this button before you change
the channel, the TV waits 30 seconds then takes you back to the original
channel. Each press adds 30 seconds to the skip time. Press CLEAR to
cancel. Also functions as RESETin some menus.
CH + (up) I- (down) Use to scan up and down through the channels in
the current channel list. You can also use the CH +I- buttons on the TV's
front panel to change the channel.
VOL < (down) and > (up) Adjusts the audio volume of the TV.
CC (Closed Captioning) Brings up the Closed Captioning Display.
Subsequent presses change the display mode.
SYSTEM This button allows the remote to change between TV1 and
TV2 mode. It also allows access to system-defined functionality, when
available. See the description later in this section for more details.
GO BACK Moves you back and forth between the last two selected
channels. In the menu system, returns you to the previous screen.
GUIDE Displays or clears the Channel Guide (during normal TV
viewing only).
INFO Displays or clears the Status Display.
CC _, GO BACK
GUIDE STEN_ ENFO
MENU CLEAR
10
ANTENNA
0
REVERSE PLAY FORWARD
RECORD STOP PAUS£
_IP SWAP CHCTR[ RESET
OOO©
Some buttons on universal and basic
remotes have different names, but the
same function. A list of such buttons
follows:
CRK17TC1 CRK76TK1
ON. OFF POWER
WHO. INPUT INPUT
]
10