Filter
Top Products
STARTUP
The steps below will get your TV connected and ready for watching. For
more details, refer to the sections listed.
CAUTION:
If you choose to use a stand with your TV, take precautions that the
stand or other furniture the TV is placed on is properly located and
of adequate size and strength to prevent the TV from accidentally
being tipped over, pushed off, or pulled off. This could cause
damage to the TV and/or personal injury.
1. Hook up Your TV
See the "Connections" section for details.
Hook up any antennas, cables or other equipment to your TV before
you follow the steps below.
2. Plug in the TV
Plug the cord into the outlet, matching the wide and the small end of
the plug with the outlet. Note: your plug may look different than the
one pictured here.
3. Obtain a Master Remote
A master remote (CRK17TD1) is required for setup of many of the TV's
features. Most of the operating instructions in this manual are
explained using the master remote. (A master remote can be purchased
from your distributor. See the "Using the Remote" section for details.)
4. Put Batteries in the Remote
1. Pull off the cover of the battery compartment.
2. Place the two AAA batteries into the remote as shown at right,
matching the + and- end of each battery in the compartment.
3. Replace the cover.
5. Turn on the TV
Press POWER on the remote.
OR
Press POWER on the TV.
Power
3