Filter
Top Products
Auto Tuning Displays a choice list that lets you set up the TV to
automatically tune to the correct input channel when you press its
component button (VCR1, DVD, VCR2, or SAT) on a universal remote.
The autotuning feature will work with RCA, GE and PROSCAN
components; it may not work with all models of other brands.
The component button choices are:
VCR1 Displays a choice list that lets you select the channel that the
TV tunes to when you press the VCR1 button.
VCR2 Displays a choice list that lets you select the channel that the
TV tunes to when you press the VCR2 button.
DVD Displays a choice list that lets you select the channel that the
TV tunes to when you press the DVD button.
AUX Displays a choice list that lets you select the channel that the
TV tunes to when you press the AUX button.
SAT Displays a choice list that lets you select the channel that the
TV tunes to when you press the SAT (or SAT*CABLE) button.
The input channel choices are (not all choices available on all models) :
Ch 3 Choose this if your component is connected to the antenna
jack on the back of the TV, and you want the TV to tune to channel
3 when you press the specified component button. Reminder: Make
sure the component's Ch 3/4 switch is set to channel 3.
Ch 4 Choose this if your component is connected to the antenna
jack on the back of the TV, and you want the TV to tune to channel
4 when you press the specified component button. Reminder: Make
sure the component's Ch 3/4 switch is set to channel 4.
VID Choose this if your component is connected to the Audio and
Video In jacks on the back of the TV and you want the TV to tune to
the VID input channel when you press the specified component
button.
SVID Choose this if your component is connected to the S-VIDEO
jack on the back of the TV and you want the TV to tune to the SVID
input channel when you press the specified component button.
S-VHS, or Super-VHS, is an extended format of VHS and improves
the picture quality of the signal passing through the S-VIDEO input.
Reminder: Make sure to also connect audio cables in order to get
sound when using S-Video.
If a component button has not been programmed,
it's input will appear as "--, "
Component
and
ON. OFF
buttons
WHO, INPUT
button
I emember that you can also press the
WHO. INPUT or INPUT button on the
remote to switch between the input
signals.
)
19