Filter
Top Products
Connections & Setup
Chapter 1 19
Tip
If you move to a new zip or postal
code, or if any of your information
changes and you need to access the
setup screens from the TV’s main
menu— press MENU, choose GUIDE
Plus+ Menu, and choose GUIDE
Plus+ Setup, then choose Setup.
The GUIDE Plus+ System Setup
Important: If you have a VCR or cable box connected to the TV,
you need to connect the G-LINK cable to use the GUIDE Plus+
system. Go to page 15.
The GUIDE Plus+ system is an on-screen interactive program guide that
lists what shows are on TV in your area. In order to receive program
listings, you need to complete the following steps.
Step 1: Begin Setup
Use the arrow buttons to highlight Setup and press OK.
Step 2: Identifying Your TV’s Location
1. If your country is highlighted, press OK on the remote control.
If your country isn’t highlighted, press the up or down arrow button
on the remote control to highlight your country and press OK.
2. Use the number buttons on your remote to enter your zip code or
postal code.
Press OK when you’re finished.
Note: If your postal code contains letters, press the up and down
arrow buttons on your remote to enter letters, and press the right
arrow button to go to the next space. The left arrow button also
moves the highlight to the left.