Filter
Top Products
Connections & Setup
Chapter 1 13
MENU
CLEAR
FORMAT
INFO
GUIDE
SAT•CABLE
VCR
DVD
TV
AUX
AUDIO
INPUT
ANT•CABLE
CC PRESETS SOUND
SUBCHANNEL
SKIP
REVERSE
PLAY
FORWARD
STOP
PAUSE
RECORD
MUTE
GO BACK
VOL
CH
ON•OFF
INPUT
ANT•CABLE
REVERSE
PLAY
FORWARD
STOP
PAUSE
RECORD
MENU
CLEAR
FORMAT
SUB
CH
INFO GUIDE
MUTE
GO BACK
VOL
CH
ON•OFF
SAT•CABLE
AUX
DVD
TV
Component Video
cables (Y Pb Pr) are
color coded- Green,
Blue and Red
White
Red
Audio cables are color
coded- Red= right audio;
white= left audio
• If you are done
connecting devices to
your TV, go to page 19
to complete the Assisted
Setup.
• To continue connecting
devices, go to the next
page.
Connecting the Device
This connection allows you to connect a device that has Y Pb Pr jacks, for example, a
DVD player. If the device you are connecting also has S-Video or composite video, we
recommend you use the component video input for better quality.
Using the example of a DVD player:
1. If necessary, connect your cable and/or off-air antenna as described on page
9.
2. Connect your Y Pb Pr component video cables.
Connect three video cables or component video cables to the INPUT 1 Y/VIDEO
P
B
P
R
jacks on the back of the TV and to the Y P
B
P
R
outputs on the DVD player.
3. Connect your audio cables.
Connect the audio (white and red) cables to the INPUT 1 R and L Audio jacks on
the back of the TV and to the Audio Output jacks on the DVD player.
Green
Blue
Red
Viewing the Picture from the Connected Device
The device in this connection is connected to the TV’s INPUT 1 jacks. To view this
device:
1. Turn on the TV and the device you want to view, for example a DVD player.
2. Press the TV button on the remote control to put the remote in TV mode.
3. Press the INPUT button on the remote control to scroll through the Video Input
Channels until you see Input 1 (Component) displayed in the channel banner.
Note: You can set up the TV to automatically tune to the correct device you want
to view. This is called Auto Tuning. See Chapter 3 for more information on Auto
Tuning.
Use these buttons to view the picture
of the device connected to the TV. Your
remote model varies according to the
model of TV you have.
Input 1 (Component)
12:39 PMProgram Title/Acquiring Channel
Input channel appears here
TV button
INPUT
button
INPUT
button
TV button