RCA P52730 CRT Television User Manual


 
Follow one of the steps below to connect an indoor or outdoor antenna to your "IT (only if you do not have a
cable-TV system). You can connect the antennato eitherANTA orANT B as explained onpage25.
A
If the antenna cable coming from your home antenna is a 75-ohm round coaxial cable that carries only VHF (channels 2-13),
only UHF (chaunels 14-69), or VHF and UHF channels, connect it to your set like this:
Incoming -- _ _ _ _ "__ _ -- _ _-
Cable _ _ _
From
l
Home VHF or UHF Only
Antenna or
VHFKIHF Combination
CABLE/AN'rEI/NA
I ANTA
i
! Am'. BACK
i@)
, | ..i
i
B
--OR-
If the antenna cable coming from your home antenna is a 300-ohm fiat•twin lead that carries only VHF (channels 2:13),
only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:
Incoming
Cable
From
Home
Antenna
sl ,_"
VHF or UHF Only _._
or Antenna Adapter*
VHF/UHF Combination (such as RCA #193983)
CABLE/N_ITENNA
/_ITA
BACK
ANT B
(_ OFTV
C
D
-OR-
If the antenna cables coming from your home antenna(s) are a 75-ohm round coaxial cable that carries VHF (channels 2-13)
and a 300-ohm flat twin-lead cable for UHF (channels 14-69), connect them to your set like this:
Incoming UHF
Cables
From _ and
Home
Antenna(s) VHF
--
[_]- . _ \\ (such as RCA #197551)
-OR-
CAI_LE/ANTENNA
__A BACK
(_ OFTV
If the antenna wires coming from your home antenna(s) are two 3.00-ohm fiat twinqead cables as shown
to your set like this:
Incoming UHF " t : Push.on
Cab,. ---
From_ and
Home
Antenna(s) VHF _ _ ...... SS_'_
Antenna Mixer*__ _--_
(such as RCA #193984)
Note: Be sure to connect the _ antenna cable to the UHF screws on the Antenna
Mixer and the VHF antenna cable to the screws marked VHF.
here, connect them
; ANTA
_-(:_7_ BACK
"'"J OFTV
I
i
I ANTE
I
30
* Optional accessories are available from most dealers or electronics sui_ply stores.