Filter
Top Products
8
Connecting Two VCRs for Copying Tapes
CH
3 4
AUDIO
VIDEOR
R
L
IN OUT
IN OUT
CH
3 4
AUDIO
VIDEOR
R
L
IN OUT
IN OUT
Playback VCR
RF Coaxial Cable
(supplied)
Recording VCR
Audio/Video
Cables
RF Coaxial
Cable
or
Use the previously selected
hookup to the TV.
From Antenna, Cable
or Cable Box
IN
FROM
ANTENNA
OUT
TO
TELEVISION
IN
FROM
ANTENNA
OUT
TO
TELEVISION
MONO
L
MONO
L
CH
3 4
AUDIO
VIDEOR
R
L
IN OUT
IN OUT
CH
3 4
AUDIO
VIDEOR
R
L
IN OUT
IN OUT
Audio/Video
Cables
From Antenna, Cable
or Cable Box
Playback VCR
Recording
VCR
RF Coaxial
Cable
or
Use the previously selected
hookup to the TV.
Audio/Video
Cables
IN
FROM
ANTENNA
OUT
TO
TELEVISION
IN
FROM
ANTENNA
OUT
TO
TELEVISION
MONO
L
MONO
L
Basic Hookup
Use this hookup for a simple connection which
requires fewer accessories.
1. Select a hookup from pages 2 - 7, and then
modify with this connection.
2. Set the CH3 CH4 switch on the playback
VCR to either channel 3 or 4.
You will tune the recording VCR to this
channel to receive the signal from the
playback VCR.
3. Connect as shown.
This connection may require additional
accessories not provided.
4. Plug in power cords of VCRs and TV.
5. Go to page 9 for VCR setup information.
Caution: The unauthorized recording of satellite
broadcasts, television programs, or other
materials may infringe the rights of others.
Advanced Hookup
Use this hookup for slightly improved copy
quality and more convenient operation Ñ use of
TV¥VCR button not required.
1. Select a hookup from pages 2 - 7, and then
modify with this connection.
2. Connect as shown.
This connection requires additional
accessories not provided.
If your other VCR is not stereo, plug this
VCR into the AUDIO L MONO jack of the
other VCR to hear sound from both channels.
3. Plug in power cords of VCRs and TV.
4. Go to page 9 for VCR setup information.
You will select the line input (audio/video)
on the recording VCR to receive the signal
from the playback VCR.
Hooking Up the VCR