Filter
Top Products
19
VCR Function Buttons
VCR Function Buttons
Press VCR1 (VCR2¥DVD) to set remote to control the VCR to use the function buttons.
PLAY
Plays a tape.
PWR
Turns off VCR when remote is set to control the VCR.
Press twice to turn off all compatible ProScan or RCA
components.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then use the number buttons to
select another. Press PREV CH to switch between the
two channels.
REC
Starts VCR recording.
Used for express recording (XPR). (See page 37.)
REW (Rewind)
Rewinds the tape when the VCR is stopped.
Searches the picture in reverse motion during playback.
SEARCH
Accesses INDEX, GO-TO, and BLANK SEARCH displays
on TV screen when VCR is stopped.
Press during playback to advance the tape 60 or 120
seconds.
SLOW Ð / +
Used for slow-motion playback.
SPEED (Tape Speed)
Selects a recording speed (SP, LP, or SLP).
STOP
Stops the normal functions such as record, playback,
rewind, fast forward, and pause.
TRACKING Up and Down
Lets you manually reduce the streaks that may appear on
the picture during play or pause.
Reduces picture ÒjitterÓ during stop-action playback.
TV¥VCR
Switches the picture signal so that it either comes from
the VCR or the TV channel. (See page 17.)
CHAN Up or Down
Selects next higher or lower channel in the VCRÕs channel
memory.
CLEAR
Resets time counter to 0:00:00.
Allows you to change entries when setting up the VCR,
setting the clock, or setting a VCR Plus+ or timer recording.
DISPLAY
Shows VCR operating displays on the TV screen.
Displays the time counter.
EDIT
Signals two properly connected compatible VCRs to begin
copying a tape. (See page 47.)
F.ADV (Frame Advance)
Lets you view one frame with each press of the button
while the tape is paused.
FF (Fast Forward)
Fast forwards the tape when the VCR is stopped.
Searches the picture in forward motion during playback.
INPUT
Turns the line input on or off.
L1 or L2 appears in VCRÕs display panel and VIDEO1 or
VIDEO2 appears on TV screen.
Line input refers to the signal coming from the component
connected to the audio/video input jacks on the back (L1)
or front (L2) of the VCR.
MENU¥PROG
Displays the VCR MAIN MENU on the TV screen.
Removes a menu from the screen.
MOVE Arrow Buttons ( )
Allow you to move through the menus, enter data and
change settings of selected features. (See page 10.)
Numbers (0 through 9)
Select a channel up to 99 by pressing two numbers.
Select a cable channel over 99 by pressing and holding 1
until 1Ð Ð appears on the screen. Then press the other two
numbers.
PAUSE
Pauses action for viewing during playback.
Pauses recording to prevent recording of unwanted scenes.
MOVE