Filter
Top Products
Recording a Program
Recording Features
Recording Speeds
Press SPEED on the remote to select a recording speed (SP, LP, or SLP). The
speed you select appears on the TV screen and in the VCRÕs display panel. The
VCR automatically selects the playback speed (SP, LP, or SLP).
■ SP (Standard Play) gives the best quality recording. That is why most
prerecorded, rental tapes are recorded in SP. Fewer programs can be
recorded on the tape. Special effects such as pause, slow motion, picture
search, and frame advance work well.
■ LP (Long Play) gives twice the recording time of tapes recorded in SP.
Special effects in playback are not recommended in LP.
■ SLP (Super Long Play) gives three times the recording time of tapes
recorded in SP. Special effects such as pause, slow motion, picture search,
and frame advance work well.
Recording Pause
This feature allows you to prevent recording short passages of unwanted
material.
■ Press PAUSE during recording to stop and start recording.
RECP appears in the VCRÕs display panel.
■ The VCR will automatically switch from pause to stop after a few minutes.
Recording Time
Cassette SP LP SLP
T-120 2Hr 4Hr 6Hr
T-160 2Hr 40Min 5Hr 20Min 8Hr
Program Express Recording (VCR’s Display Panel)
Program express recording allows you to quickly program the VCR for one recording using the VCRÕs
display panel instead of the on-screen menus. The VCR will turn off automatically at the end of the
recording.
MENU CLEAR
CHANNEL
DISPLAY
TRACKING
PROG. EXP
Buttons Located Behind Left
Front
1. Insert a tape with safety tab in place.
2. Use the PROG. EXP and the CHANNEL up or down buttons
behind left front panel control door to enter the information.
3. Press PROG. EXP to bring up the display.
The channel number flashes in the dislay panel.
4. Press the up or down arrow to select the channel number.
5. Repeat steps 2 - 3 to enter the START, END, DATE, and tape
SPEED.
The time increases in increments of 30 minutes while the date
increases in increments of one.
6. Press PROG. EXP when SAVE flashes in the display.
SAVED appears to let you know the program is set.
7. Turn off VCR.
36