Filter
Top Products
35
Recording a Program
Recording a Program
This section explains the available recording options, including the following:
■ Basic Recording
■ Recording Features
■ Program Express Recording
■ Express (XPR) Recording
■ VCR Plus+ Recording
■ Timer Recording
■ Broadcast Stereo TV or SAP (Second Audio Program) Recording
■ Audio Only Recording
■ Using Two VCRs for Copying and Editing Tapes
Basic Recording
To Make a Recording
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or TVÕs video input channel.
1. Insert a tape with safety tab in place.
2. Press VCR1 (VCR2¥DVD) to set remote to control VCR.
3. If using one of the basic hookups, make sure the VCR indicator appears in the VCRÕs display
panel. If not, press TV¥VCR to turn it on.
4. Select recording speed by using SPEED on remote.
The tape speed indicator appears in the VCRÕs display panel and on the TV screen.
5. Select the channel to be recorded.
The channel number appears in the VCRÕs display panel and on the TV screen.
6. Press RECORD on the VCR or REC on the remote to begin recording. REC appears in the
VCRÕs display panel while the VCR is recording.
Watch a TV Channel While VCR is Recording a Different Channel
1. Follow steps 1 through 6 above.
2. If using one of the basic hookups, press TV¥VCR to switch to the TV channel.
The VCR indicator will turn off in the display panel.
3. Select the channel you want to watch with the VCRÕs remote or TVÕs channel buttons if the
remote does not control your TV.
Press TV on VCR remote to control a compatible TV.
4. When recording is finished, press VCR1 (VCR2¥DVD) and STOP.