RCA PSVR65 VCR User Manual


 
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates
Òdangerous voltageÓ inside the
product that presents a risk of
electric shock or personal injury.
This symbol indicates important
instructions accompanying the
product.
WARNING
To reduce the risk of
fire or shock hazard, do
not expose this VCR to
rain or moisture.
Product Registration
Please fill out the product registration card and return it immediately. Returning this card allows us to contact you if
needed.
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the
serial and model numbers in case you need them. The numbers are located on the back of the VCR.
Model No. ___________________________________________________________________
Serial No. ____________________________________________________________________
Purchase Date: _______________________________________________________________
Dealer/Address/Phone: ______________________________________________________
_____________________________________________________________________________
WARNING
Important Information
PSVR65
CAUTION: To reduce the risk of electric shock, match wide blade of plug to wide slot,
fully insert.
ATTENTION: Pour Žviter les chocs Žlectriques, introduire la lame la plus large de la
fiche dans la borne correspondante de la prise et pousser jusqœ au fond.
Refer to the identification/rating label on the back of the product for the proper operating
voltage.
FCC Regulations state that unauthorized changes or modifications to this equipment may
void the userÕs authority to operate it.
Cautions
This reminder is provided to call your attention to Article 820-40 of the
National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1)
which provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system
of the building as close to the point of cable entry as practical.