Filter
Top Products
24
1. Press and hold the SETUP key until the LCD
displays “
CCooddee SSeettuupp……..MMooddee??
” and the LED remains on.
Release the SETUP key.
2. Press the MACRO key twice, and “
DDeelleettee aa MMaaccrroo??
”
appears in the LCD. Press and release OK on the LCD.
3. The LCD displays “
DDeelleettee aa MMaaccrroo??
”. Press and release
the MACRO key (1-9) to select the Macro you want to
delete.
NOTE: When deleting a Macro, only the programmed Macro
key (s) will be highlighted on the LCD.
4. The LCD displays “
CCoonnffiirrmm ttoo DDeelleettee??
”. Press and
release OK on the LCD.
5. The LCD displays “
DDeelleettee aa MMaaccrroo
” or “
SSeettuupp aa MMaaccrroo??
”
If no more Macros need to be removed continue to
next step.
6. Press EXIT on the LCD. Macro key deletions now
complete.
Master Clear
To Clear all stored Learned Commands, Timer Events and
User Programmed Codes, i.e. return to factory defaults...
1. Press and hold the SETUP key until the LCD
displays “
CCooddee SSeettuupp……..MMooddee??
” and the LED remains on.
Release the SETUP key.
2. Press and release the SETUP key repeatedly until
“
RReesseett AALLLL
?” appears in the display.
3. Press and release OK on the LCD screen.
4. “
CCoonnffiirrmm ttoo RReesseett??
” is displayed. Press and release the
OK on the LCD. The remote returns to normal
operation screen.
5. All settings are now reset to the factory default.
At any time you are in Setup Mode you can simply exit
and return to normal operation by following the below
procedures.
1. Press and release the SETUP key repeatedly until
“
EExxiitt SSeettuupp
” appears in the display.
2. Press and release OK on the LCD screen.
3. The remote is now in normal operation mode.
To Delete A Macro
Reset All
Exit Setup
x2
RCU1000B_IB.qxd 10/9/01 11:09 AM Page 24