Filter
Top Products
26
To Set Keypress Beep ON or OFF
1. Press and hold the SETUP key until the LCD
displays “
CCooddee SSeettuupp……..MMooddee??
” and the LED remains on.
Release the SETUP key.
2. Press the SETUP key repeatedly until “
SSeett mmoorree
OOppttiioonnss
” appears. Press and release the OK on the
LCD. “
SSeett TTiimmee??……DDAAYY HHHH::MMMM
” now appears in the LCD.
3. Press the SETUP key repeatedly until “
SSeett BBeeeepp??……
OOnn<<>>OOffff
” is displayed. Press and release OK on the
LCD
4. “
SSeett BBeeeepp??……OOnn<<>>OOffff
” remains in the display with a
solid arrow indicating the current setting. Press and
release the LEFT or RIGHT ARROW key to select
ON or OFF. Press and release OK twice to save beep
state change.
5. LCD displays “
SSeett mmoorree OOppttiioonnss
” and beep change is
now complete. Press EXIT on the LCD.
To Set LCD On-Time
1. Press and hold the SETUP key until the LCD
displays “
CCooddee SSeettuupp……..MMooddee??
” and the LED remains on.
Release the SETUP key.
2. Press the SETUP key repeatedly until “
SSeett mmoorree
OOppttiioonnss
” appears. Press and release OK on the LCD.
“
SSeett TTiimmee??……DDAAYY HHHH::MMMM
” now appears in the LCD.
3. Press the SETUP key repeatedly until “
SSeett LLCCDD OOnn
TTiimmee??
” appears in the display. Press and release OK on
the LCD.
4. The LCD displays “
LLCCDD OOnn ffoorr XX00 sseeccss
” where “
XX
” is
the “tens digit” of the current on time. The “
00
” is
fixed and you can only increment the 10’s digit for
10, 20, 30, …90 seconds on time. Press and release or
press and hold the UP (▲) or DOWN (▼) key to select
desired on time. Press and release OK twice on the
LCD to save your settings.
5. The LCD displays “
SSeett mmoorree OOppttiioonnss
”. Press EXIT on
the LCD.
Setting More Options continued
When any key is pressed, an audible beep can be heard to acknowledge the keypress. This
beep can be turned on or off. The default state is enabled (ON).
OR
The LCD remains on for a user selectable time period (10, 20, 30,…90 seconds). The Power-on
default is 10 seconds from last keypress. You are not allowed to set an LCD on timeout period
that does not equal or exceed the Backlight on time.
x2
x2
RCU1000B_IB.qxd 10/9/01 11:10 AM Page 26