Filter
Top Products
7
To program your remote to control your TV or VCR, or Cable, etc:
Enter Setup by pressing and holding the SETUP key, then release...
Press TV, or VCR, or Cable etc...
Enter 3 digit code for your brand of TV, or VCR, or Cable etc. (from the code list)...
(see pages 12-16)
Press and release EXIT then OK to return to normal operation.
To search for a code (instead of using the code library list):
Turn on device (e.g TV)...
Enter Setup by pressing and holding the SETUP key, then release...
Press SETUP again...
Press TV, VCR or Cable...etc.
Press CH UP repeatedly until TV changes channel...
NOTE: Some devices do not have the CH+/- keys. In this case press the ON•OFF key on the LCD.
Press OK.
Press and release EXIT then OK to return to normal operation.
To find out the code you have set for a particular device (TV, VCR, etc):
Press that device key. The code set is displayed at the top of the LCD.
To turn on your device:
Press device key...
Press the ON•OFF key...
To set the time and day:
Enter Setup by pressing and holding the SETUP key, then release...
Press SETUP repeatedly until
SSeett MMoorree OOppttiioonnss??
is displayed...
Press and release OK...
Press and release OK to enter into set time...
Press and release LEFT or RIGHT ARROW keys to select 12Hr or 24Hr time format...
Press and release OK...
Press and release the UP or DOWN key to select the DAY...
Press and release OK...
Press and release the UP or DOWN key to select the HOUR...
Press and release OK...
Press and release the UP or DOWN key to select the MINUTE...
Press and release OK key twice...
Press and release EXIT then OK to return to normal operation.
To learn a command:
Enter Setup by pressing and holding the SETUP key, then release...
Press the LEARN key at the top of the LCD screen...
Press and release device key (TV, VCR, etc.)...
LLeeaarrnn IIRR KKeeyy??
is displayed. Press and release the RCU1000B key you want to “teach” a code
to...
LLeeaarrnniinngg PPlleeaassee WWaaiitt
is displayed...
Press and hold the original remote key you want to transfer to the RCU1000B until
LLeeaarrnn IIRR KKeeyy??
appears...
Release the original remote key...
Repeat the above for other buttons to be learned...
Press and release SETUP key when all desired original remote commands have been learned..
Press and release EXIT then OK to return to normal operation.
To delete stored learned commands under a device:
Enter Setup by pressing and holding the SETUP key, then release...
Press SETUP repeatedly until
DDeelleettee IIRR MMooddee??
appears...
Press and release desired device key (TV, VCR, etc.).
CCoonnffiirrmm ttoo DDeelleettee??
is displayed...
Press and release OK to delete all the learned keys.
Press and release EXIT then OK to return to normal operation.
Quick Reference Guide
RCU1000B_IB.qxd 10/9/01 11:09 AM Page 7