Filter
Top Products
English - 29
Connecting & Setting up
Step 5 : Connecting the Power Cord
“Auto” appears in the panel display. This means that the current time is being set automatically (Auto
Program) through the antenna under connection and also the channel is being set.
The setup may take a few minutes.
When the HDD & DVD RECORDER operates normally, the current time is automatically set and displayed in the front
panel display.
■
After the current time is set automatically,
HDD & DVD RECORDER will perform
Auto Channel Memory for about 3
minutes. If power is turned on while Auto
Channel Memory is in process, Auto
Channel Memory will stop. In this case,
do Auto Channel Memory from MENU
(See page 34).
NOTE
02-DVD-HR720_XAA_17-29_CONNECT 2005.9.7 7:47 PM Page 29